Our impression of Internet celebrities may still stay in Douyin. Today, I want to introduce to you an alternative Internet celebrity: Muddy pottery master in Wuhan City, Hubei Province. Rich work experience has slowly turned him into an industry expert!

年入20万的网红泥工,教你如何贴好瓷砖

Master Tao, a post -80s migrant worker, is not very old, but is a well -known master in the decoration industry in Hubei. The tiles posted by his hand not only have the lowest spacing errors, but no matter how complicated the shape, he can deal with it freely. Now, he has become the captain of the construction of key projects. Cement deployment, dry humidity, size calculation, and modeling design all form a set of standard standards. In addition, Master Tao summarized many effective paving skills and taught it to newcomers based on her years of construction experience.

年入20万的网红泥工,教你如何贴好瓷砖

Master Tao has his own opinions on the problems of empty tiles, unevenness, and adhesion. Let’s take a look at his demonstration!

Tile paving is the highlight of the decoration: because the paving quality of tiles will directly affect its ultimate effect. Therefore, readers need to pay more attention when paving in tiles, and do not neglect! In addition, there are many places to pay attention to tile laying and acceptance. For example, the mortar ratio, and the proportion of cement and sand, should focus on whether the machine blade is solid during the polishing process. Next, the editor focused on introducing Master Tao’s experience in the decoration industry.

-01-

年入20万的网红泥工,教你如何贴好瓷砖

How to lay tiles

年入20万的网红泥工,教你如何贴好瓷砖

The laying method of tiles can be divided into wet stickers or dry stickers. The difference is that the proportion of water against water and the use of adhesives and glue content are different. Wet stickers are generally used, while floor tiles are generally used in dry stickers, and adhesives, glue and a small amount of cement are used instead of traditional crafts. Is it because the wall of the brick wall is qualified? Tiles and cement are integrated, but there is a gap between the cement and the wall, which can easily lead to an empty drum.

After dealing with the wall, the use of the wire can test whether the wall surface is horizontal and vertical. If the horizontal line is crooked, the tiles posted in the construction will also be crooked, so pay special attention. Wet tiles need to soak water in advance. The purpose is to make the tiles with a water absorption rate not quickly absorb the water in the cement layer, so that the cement will lose the corresponding performance. Theoretically, the tile should be soaked for more than 2 hours.

年入20万的网红泥工,教你如何贴好瓷砖

The dry tiles can be determined based on the texture of different tiles to soak water. Do not soak tiles. Just wipe off the floating ash and dirt on the surface of the tiles with a clean wet rag before laying. The bonding agent is adjustable, and the large gap can be adjusted in time, and then the excess slurry overflowed with the surface overflowing with a clean rag can be adjusted in time.

-02-

Preparation before the tile paving

Before the wall bricks, the line positioning and bricks should be carried out. Non -tiles should be discharged at secondary parts or corners. Determine the horizontal and vertical signs on the wall, pad the bottom ruler, hang the oblique paving, and confirm the position of the yin and yang horn bricks before starting. Before paving the floor tiles, the thickness of the mortar should be determined according to the design requirements, and the cross line should be controlled to control its total thickness and the surface flatness of the stone and ground tiles.

According to the mixed ratio, the cement is 11 kg per square meter when the wall is pasted, 33 kg of Zhongsha, and a small amount of glue. When paving tiles, the cement is 12.5 kilograms per square meter, 34 kg in Zhongsha, and a small amount of glue. After mixing well, the processed cement is put on the tile, including all the four corners of the tiles must be covered. If the cement is not uniform and uneven, it is easy to have an empty drum after the tiles are pasted. In addition, the thickness of the cement must be mastered, usually 8mm ~ 12mm. Too thin, tiles are easy to stick, and the queen queen easily shrinks, and the tiles will be split in about half a month.

It seems simple to stick tiles, but there is no experience. It is prone to empty drums and unevenness. At the same time, the preset wall effect will be greatly reduced. When posing, pay attention to whether the corners and corners, edges, and edges are aligned, and to keep the unified seam with the locator. When the tile is placed flat, the skin hammer is used to gently press the whole brick wall and ensure that each corner is in place. After paving, clean the surface in time. If there is a gap, use cement to fill in the seam after 24 hours, and select the pigments that are coordinated with the brick surface colors to mix well with the white cement and then embedded.

-03-

Treatment of tiles

年入20万的网红泥工,教你如何贴好瓷砖

After the floor tiles are paved, the seam is cleaned 24 hours. Before the seams, the impurities in the gap between the floor tile should be cleaned and the sewing seam is used for the sewing. After the paving is over, it needs to be cleaned in time and protects it. When paving, the pipeline, the lamp switch, the supporting parts of the toilet equipment, etc., must be cut with a whole brick cover to prohibit the use of non -tiles to pieces. Ensure that there is a flowing water slope, no water accumulation, and water.

年入20万的网红泥工,教你如何贴好瓷砖

The air drum rate, flatness, verticality, yin and yang horn, and seams are all the focus of tile acceptance. When accepting the acceptance, prepare metal tools such as key, small stainless steel soup spoons to tap and detect whether the brick surface is empty. You can also touch the flatness between the brick and the brick with your hands, or prepare a wooden board to press it up to see if the brick surface is flat.

Pay attention to whether the floor tiles need to spell or press

Unite

年入20万的网红泥工,教你如何贴好瓷砖

Putting the direction. The flatness of the floor tiles is checked with a 2M level. The error shall not exceed 0.5mm. The height difference between the adjacent bricks must not exceed 0.5mm. After the floor tiles are completed, the seams are cleared 24 hours after cleaning, and they are cleaned and maintained.

-04-

Measures to prevent tiles empty drums

The phenomenon of empty drums in the floor tiles is controlled within 3%. The empty drums on the main channel must be reworked. 3%of the single -blocking corner is empty, and the whole block must not be empty. After the floor tiles are paved, check the flatness, and after the empty drum, the color difference, the color difference, the thick cardboard or splint, the old carpet, etc. are covered and protected. The seams must be strictly pasted with a wide paper tape to prevent the debris from entering.

年入20万的网红泥工,教你如何贴好瓷砖

The gap between the wall of the wall is the same, and the diagonal of the bricks should be flat (0.3mm error allows). In addition to the tiles and the diagonal of the kitchen and bathroom wall, the horizontal degree (allowed 1mm error) and verticality (allowed 1mm error) and verticality (allowance The 2mm error is allowed to be achieved. The bathroom and balcony must also consider the floor drain. Put the slope first without special reasons.

年入20万的网红泥工,教你如何贴好瓷砖

Master Tao concluded: Many readers are popular in the home of the home. The tiles are curved. It is not to say that this kind of tiles are common and easy to spread. If the whole fight, the difficulty may be higher. In addition, if you hit one end of the tile, you will get up with the other end, which will cause the phenomenon of empty drums, and you must evenly hit it. Each brick of the corner shape needs to be cut and cut, and the mating cement is evenly applied to the back of the tile evenly.

年入20万的网红泥工,教你如何贴好瓷砖

Edit Message:

No matter how you stick tiles, you must master the skills. During the construction process, the tiles have problems such as damage scratches, falling off the drums, etc., you have to repairs it, waste time and raw materials. Work to reduce the trouble of subsequent maintenance. I am the editor Ren Qingjing. The tile paving is just the tip of the iceberg in the home improvement construction. I believe that the problems encountered by each family are different. To this end, we invite the construction expert Cheng Chunquan teacher to answer all kinds of various types in the community. Construction issues, you can click at the end of the text

[understand more],

Enter the expert community communication.