There are only two wooden boards for this folding stool. Users only need to insert a seat plate into the board to maximize the minimalism. The streamlined shape, coupled with the graffiti shape, is loved by users. It is a plane when it is placed, which saves space. At the time of support, the seat plate can be removed by pulling out the board by fixing the board. Simple and strong, suitable for different spaces.
Fine wooden boards, hand drills, hand saws, woodworking, thread saws, tenon machines, F clips, wood screws, gauze, woodwork glue, pencil, corner ruler, graffiti paint, etc.
The required materials are just two wooden boards, and the production is also very simple. Make a cricket on the board, make a tenon on the seat, and then reinforce and adjust it appropriately, but it is absolutely creative. The wooden friends who come to the woodrs circle, let’s make it now.
Saw to cut the seat
Cut the two fine wooden boards. If the wooden board is as hard as possible, the flexible wooden board, the wooden board is about 90*39cm in length and width. After cutting, draw the tenon -and -mortise line that needs to be cut on the wooden board.
Drill the holes on the second ends of the eye drawing line with your hand, and then use a thread to see the eye. If there are no electric tools, use woodworking and wire saws. In the past, we used handmade tools.
Cut the seat tenure tenon
First fix the seat plate on the woodworking table, clamp it with a clip. Then cut it along the line, do not cut it to the drawing line when cutting. Cut as little as possible, you can use woodworking to repair slowly, and cut it if you cut more.
Nailing board reinforcement
First cut the two 5.5*45cm reinforced wooden strips, and then use sandpaper to polish. Clear wood chips and debris, then apply woodworking glue, and then fix it with F clip. Wait for the woodworking glue to be dry.
Cut a load -bearing wooden bar at 6.5*38cm and make the wooden screw installation holes on the second ends of the inheritance bar. Remove the inner concave of about 0.2cm in the middle 28cm in the middle of the load bar. Because the width of our woodworking is the same, so it is concave here, so the insert can be placed freely (pictured).
Size and fine -tune
After the seat plate is inserted into the board, the cross will not intersect into right angles, so cutting some parts should be cut. If the wooden board is too thick, then the bottom of the saw must be seen from the bottom of the bottom, so that the bottom ends of the folding stool on the bottom of the folding stool are on a horizontal plane. After all adjustments, you can polish.
This folding stool is very small and portable. It can be hidden in the car. It is suitable for carrying and traveling, and it is suitable for home use. It is especially suitable for going out to play. It is a comfortable and convenient bench.
Finally, it is your artistic talent and imagination. You can cut the board into the cartoon image left by the board, or you can cut your favorite shape. Then graffiti, paint, etc., do you feel very cool?
(Circle cards have been added here, please check today’s headline client)