[Article Introduction] Thermal transformation is divided into glue film transfer and sublimation transfer. The adhesive film transfer uses hot paintings/decorative membranes/engraving fonts for scalding. Are you still unable to distinguish between the difference between the font and the thermal transfer paper? Xiaobian simply sort out the five major differences of the two materials.

1. Different operation equipment

The engraving film (except the color spray film): cut it through the engraving machine/laser machine/marking machine, etc., and the scalding machine is scalded after discharge.


Hot Transfer Paper: Print it on the transfer paper by digital inkjet printer, and then pass through the scalding machine.


2. Different adhesion methods

Carved Faste: Use hot melt glue and cloth bonding.

Heat to printed paper: Ink directly penetrates and sublimates into the cloth pattern of the coil.

3. Different colors


The carving film (except for color spray membrane): The main color can be added to the color.


Hot -printed film manufacturer

Hot -transferring paper: mainly white, printing various patterns on paper by using special inks.

Transparent painting


4. Different application scope

Carved Faste: Seal the color and monochrome logo for any color of the dark and light fabric.


Painted painting

Heat to printed paper: Suitable for light -colored pure polyester, polyester cotton and pyrine blended fabrics.

Paint -hot painting

5. Different temperature of hot printing


Carved Faste: The hot print temperature is 150-160 ° C.

Heat to printed paper: The hot print temperature is about 180-230 ° C.

After the analysis of the editor, you should understand the difference between the carving font and the hot transit paper. Before the formal batch transfer, you should test the samples of the fourth fourth.