drawing

SolidWorks画一个三角钢管,用结构系统就简单多了

Modeling process

SolidWorks画一个三角钢管,用结构系统就简单多了

1. [View benchmark] Draw polygon -triangle.

2. [3D sketch] The vertical line is constrained along the Y -axis, and the four oblique line adds equal geometric relationship.(These two sketches can be drawn together)

3. [Structure System].(This is the function that only started in the 2019 version)

SolidWorks画一个三角钢管,用结构系统就简单多了

3-1. Or [Insert]-[Structure System]-structural system.

SolidWorks画一个三角钢管,用结构系统就简单多了

4. [Main component] Main component type: path line segment component, select 6 blue straight lines.

4-1. Outline: Select a round tube casually.

4-2. You can return to the component, and the start/end extension: 100.(Don’t do this step)

SolidWorks画一个三角钢管,用结构系统就简单多了

4-3. Exit: Structural system.

SolidWorks画一个三角钢管,用结构系统就简单多了

5. [Corner Management] Keep the original settings.(After exiting the structure system, it will pop up automatically: corner management)

SolidWorks画一个三角钢管,用结构系统就简单多了

6. Design tree structure system on the left, edit sketch:

SolidWorks画一个三角钢管,用结构系统就简单多了

7. Modify the size of the circle according to the drawings.

8. Right -click on the round tube -isolated.

SolidWorks画一个三角钢管,用结构系统就简单多了

8-1. You can see the cross-section of both ends of the round tube.

9. Measurement volume: 17415846.82, correct.

10. Completed.