Feixun K3, I can pick up a starting of a starting time. It is lucky that the double holding Feixun K3 is already a dream.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

Thanks to Aunt Zhang and Fei Xun for giving me this dream opportunity to disassemble K3 to see the true appearance and test the opportunity to test the double -holding Zhongji K3 ~~~~~

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

Feixun AC 3150 dual -frequency wireless router, commonly known as “K3”. As the third -generation Internet+financial free hardware of the third -generation main push of the third -generation product push for Feixun Company, these days have made the limelight on these days. At the same time, the configuration of the K3 revealed that it also caused too much rumors to earn the risk of the K3 model for free. The risk is uncontrollable, and investment still needs to be cautious. People are awesome, but the rumors stop at the wise.

I still remember that I picked up one of the a few days ago when I first started in K3, and I once mentioned the Internet+financial model. Here we will not discuss this topic. If you are interested, you can click to see it. Today, we will open the box to see Zhenrong and hardware disassembly instructions.

Open the box:

▼ The packaging of Zhong Guijun is also quite in place, SF has been delivered early

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ Aunt Zhang’s unpacking Feixun K3 and K3, which was released in the first few days

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ 2 Feixun K3, quite cool

▼ The cover of the front and rear packaging is very simple

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ The left and right are the logo of Fei Xun

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ The above is still the logo of Feixun, and the introduction below is the introduction of the Feixun router

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

The correct name should be AC3150 dual -frequency wireless router K3 is just a model

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

The configuration is:

Antenna Type: 8 high -gain omnidirectional antennas

Port specification: 1GE 10/100/1000M Wan port, 3 10/100/1000m lan port, 1 USB3.0 port

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

Agreement standard: IEEE802.11a/B/G/N/AC, IEEEE802.3, IEEE802.3U

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

Execution standards: GB4943.1-2011, GB9254-2008, YD/T993-1998

Manufacturer: Shanghai Feixun Data Communication Technology Co., Ltd.

▼ Just pull the side packaging to take away the outer packaging

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ Inside is the real Feixun K3 packaging box, the packaging box texture is very hard

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ Take a segmented packaging, you can see the outer capacity of K3 if you want to mention it.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ Gently mention the Feixin K3 to take it out. The weight is still higher than that of ordinary ones

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ There are sponge packaging in the hard box, and there are accessories in the sponge below

▼ Stretch into the sponge with your fingers, pull it up to pull out the sponge. You can see a piece of paper and a power plug inside.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ The small paper is a folding instruction manual. The plug is a square surface, narrow -rectangular bottom. Try to occupy a small socket area. Plug can retractable mode

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ Fei Xun K3 is designed with pure silver. The material is estimated to be ABS plastic

▼ Fei Xun K3’s shape is really good. Especially the side is slightly sloping on the side, and the face value is quite high

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ The front design of Fei Xun K3 and the side design are full of fashion.

▼ Fei Xun K3 back is the output input port. Power cable interface, 10/100/1000m WAN+LAN+USB 3.0 and there is a key bit design

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ The black vertical lines before and after the k3 are actually the hole of the heat dissipation. On the side of its vertical lines, the heat dissipation and ventilation hole can be seen

▼ Feixun K3 has a circle of foot pads at the bottom of the K3, which is affixed with product ID, K code, barcodes, to drop it for security PS

▼ This is the front of Feixun K3, and it is also one of the scientific and technological selling points of Feixun K3, which can be seen on the screen. And touch screen key operation

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

Detailed dismantling:

After all, there are so many rumors. It is because the cost of the configuration of Feixun K3 is too high. It is inevitable that such high returns, because the price of an AC88U with the same configuration has been between 1200-1999 for a long time. The price of Feixun K3 1999 also sent a mobile hard disk, which adopted a 1 -year cashback (return to 349 in the first month, and returned 150 in November in November). It is normal for rumors to say. However, it still does not cover the enthusiasm of the technical party, because the understanding of Fun Xun K3 is indeed quite better than the previous two generations. There are also rumors that the hardware structure of Feixun K3 is not so high, so we now have a glimpse of the internal structure of Feixun K3. Defeat rumors.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ First of all, we pulled one corner of the foot pad at the bottom, and then pulled it out slowly. After winning, you can see 4 cross screws

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ Open the 4 cross screws, everyone touches the bottom of the striped paper with a concave groove and thinks there is still a screw. In fact, there is no, it may be just the ending of the mold injection hole. So you don’t need to tear the barcode paper

▼ Next, I was also exploring it. Later, I found that the bottom was unloaded with a card buckle. This is very simple here.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ The next step is more difficult, disassembling the silver cover on the left and right sides. There are 6 buckles in total and 8 buckles on the two sides.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ Remove the left and right, and groping for almost an hour, mainly afraid of destroying its buckle, but still inevitably destroyed the lower buckle that chose to start first, but I still recommend that you move it from the lower part, because I follow me later. When I put it back, I found that it is not tightly destroyed by the lower part, because it can be fixed by the 4 screws on the two sides just dismantled.

▼ Carefully look at the inside of the case on the 2nd side, it really is made by the labeling of ABS+PC material

▼ We come back to see the internal structure. The black ABS material is sealed inside. We can see the heat dissipation holes everywhere. This direction is mainly seen that the above three antenna design is fixed on the card slot. Here is one, I need to find another direction when I look at it

▼ When we came back to see this direction, we finally saw the screws. With screws, we said that we could continue to disassemble. Here I tone the direction, the antenna should belong to the top

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ You can see the PCB array antenna above, there are always 5 pieces here

▼ It is marked on it. The wide one is 2.4G antenna, and the narrow 5G antenna.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ The following block should be the core PCB board hardware and core chip of Feixun K3. You can see a large amount of heat dissipation board pressed on it. Just disassembled. Everyone looks at the card slot on the left. There is a small plastic board alone. It needs to be pulled out first. This is a fixed plastic board that is blocking the overall plate.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ It ’s better to disassemble the screws, and the screws that can be seen were disassembled and still could not be mentioned. Later, the plastic board that was just mentioned was pulled out. But I still feel a bit fixed

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ So pull out the cooling aluminum plate above

▼ It is found that there is indeed no screw fixed, it may just be a bit of a bit of card position, so adjust the direction and gently lift it back.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ The antenna above is fixed on a completely detachable buckle module. Just mention it

▼ As for the three antennas in the back, it is fixed in the overall module. We need to dismantle it manually and just open it gently

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ At this time, a line of lines can still be seen at the top, which should be one of the selling points of Feixun K3. The top can be visually panel.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ We gently catch the bottom of the line line, and we can remove the line lines, and it uses needle access. Vaguely visible the word K3 on the panel label on the top. I wanted to remove the panel too, but it was not easy to start, so I had to give up

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ We can see that after disassembling, there is a template in the middle and the LCD panel part above.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ It’s dark, first turn on the lights. I guess the disassembly method is to lift the front panel, but such a good tool may destroy the appearance, and I give up this part. After all, visual panels are not the focus of our concern

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ Let’s see the core module proposed, I also put it in turn, the antenna is actually above

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ PCB array antenna, the above 5, the following 3, a total of 8 antennas, 5G and 2.4g each with 4

▼ The connection method of the PCB array antenna to the main control board is to take a wiring. After careful observation, it should not be welded, but it is used to use the uneven needle buckle. In order to prevent installation or disassembly and transportation, it automatically disperses. It is also fixed with hot melt glue. It affects the face value slightly, but it can’t be seen inside. Safe first is important

▼ Let’s look at the PCB board first, many metal shielding and heat dissipation cream are pasted on it

▼ This is the input and output port of the back panel

▼ You can see the font of K3 under the barcode paper. There is also a sign that prohibit contact with your hands

▼ This was later known. It turned out that the upper and lower layers of PCB boards were connected with this module. Demand out first

▼ I still couldn’t mention it, I found that there were still screws on the back, so I picked up the screw to remove it all.

▼ Finally, there are PCB boards on the upper and lower layers. It can be seen that there are 2 heat dissipation aluminum slices inside.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ First of all the heat dissipation aluminum plates on the left, we can see that the metal shielding cover and heat sink below it can be seen

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ 512M memory chip

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ The golden finger on the left is at the module interface connecting 2 up and down PCB board

▼ I don’t know anything about this part of the capacitance.

▼ Disassemble the metal shielding cover, you can see the CPU and the flash core

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ You can see the 128M flash core model

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ Above is CPU, BCM4709C, dual -core 1.4G frequency

▼ The PCB board on the right should be the WiFi antenna solution. There is also a piece of heat dissipation aluminum sheet. In addition to using the golden finger module to connect to the upper PCB, there are 4 metal columns on the four sides.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ The upper and lower layers should be dismantled in advance through the interface of the golden finger of the module. It was later discovered

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ Similarly, we disassembled the heat dissipation aluminum blocks, and there are all kinds of electronic components here. Nothing is worth talking about

▼ Satisfy the curiosity of enthusiasts, take a few photos for everyone, but the shrinkage is slightly not powerful, 4K pictures. It may not be enlarged.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ We go back to the other side of the other side of a considerable metal shielding cover and heat sink

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ Let’s disassemble all metal shielding hoods. It can be seen that the 2.4G5G wireless processing chip has become a wireless power amplifier chip

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ The following content is relatively professional. I have introduced the professional forum. This should be 2.4G, SKY2623L power amplifier, a total of 4 total

▼ This is 5G here, and the PA5542 power amplifier is used, which is also 4

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ The above is the BMC4366 wireless processing chip, with a total of 2, which handles 2.4G and 5G respectively

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ It may not be clear, it doesn’t matter, I wipe the white silicon grease in color first

▼ This looks clearer, and on the left is 2.4g

▼ On the right is 5G

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

The disassembly here is completed. It can be seen that the workmanship of Feixun K3 is quite good. The Broadcom BCM4709 Cortex A9 1.4GHz main frequency processor. The memory uses Etrontech EM6GE16EWXC-12, 512MB DDR3-1600 memory particles, and the flash memory uses a 128MB NAND Flash storage chip. Just look at these is luxurious enough. In addition, the antenna is BMC4366 wireless processing chip, and 2.4G SKY2623L power amplifier and 5G PA5542 power amplifier, 8 antenna gain scheme. There are three Gigabit LAN ports and USB3.0 interfaces. There is also its workmanship design, unique touch display. Already belongs to the high -end router. It is really worth starting.

Use measurement:

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ First remove the TP enterprise -level router that I have used for several years, and push the line to Feixun K3

▼ After power -on, the high -end display is on. Starting progress bar

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ Entering the system interface, the first thing that refers to is Feixun K3’s various information, as well as a prompt to scan the two -dimensional code control route. We first download the Feixun router APP.

▼ The real -time situation of the back panel interface, here you can see whether the interface of the back panel is connected to

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ Time problem, I have downloaded the APP to set up the network first. This shows the speed of uploading, the number of devices connected to 2.4G5GWIFI

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ This is the situation of wifi. The name and password of 2.4G and 5GWIFI. If the AP relay routing is placed in the living room, it is difficult to explain when setting a complex password, just let the guests press it to know. Quite convenient.

▼ This is the name of the LAN access and the name of the WiFi wireless access device and the speed of the download. You can return to the desktop when you open the computer and open the router when you open the computer and the full -screen game. People steal into your network

▼ I am a hundred-meter fiber at home, download 100-cricket 10-13m, upload 4-6m. It is relatively low in the telecommunications base camp because it is promoting 200 trillion fiber. And Gigabit Fiber. But I still envy Shunde’s 50M telecommunications fiber to download the equivalent 50M … It’s not the first time to upload it is too slow … Sometimes it is too long to upload the video. Yes, my TP 100M mouth download can only reach about 10.2m.

▼ Computer operation, enter P.TO or 192.168.2.1 to enter. The first thing you see is the current connection device, network status

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ Secondly, we can see terminal management. Here we are convenient to ban other connections to steal the user. The name model of the device name of Feixun K3 is indeed more accurate. You can also set speed limit settings here.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

Here you may understand why I want to set a password 87654321, just one hour, there are already more than 10+ foreign devices to enter my WiFi, although there are many solutions to prohibit them, such as Mac or binding, etc. , But I personally make it easier. After all, sometimes there are more guests at home, and I have to turn on the computer. Instead of stolen in the unknowingly, it is better to take the initiative to let them enter the sleeve, and then it is forbidden. simpler. Let’s ban one. Let them look or not.

▼ Next is wireless settings. 2.4G and 5G are fine. It is recommended that if the house is complicated, do not use dual -frequency combination. May affect the signal

▼ There are some advanced settings below, wireless AP isolation, as the name suggests, is the terminal connection between the isolated AP relay

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

Beamforming is a beam forming, which is a general signal processing technology that is used to control the direction of communication and the receiving of RF signal.

It’s all practical functions

▼ Finally, there are various functions settings. Basic this firmware settings are here, wireless extension, relay, LAN port settings, screen display, etc. … The firmware function is relatively small, but there should be some

▼ System status, you can see the status of the entire router here

▼ Let’s talk about how to use the mobile phone wifi directly to access the router. I believe many Xiaobai prefers this model. It’s simpler than a computer.

Feixun’s default is an open WiFi, we download the app directly, and then access the open WIFI of Feixun K3

▼ I use Honor 7 Full Netcom. It is better that Feixun may take into account the installation of the app, so after accessing WIFI, the first built -in web network settings are popped up. General login account passwords are admin

▼ Of course, if you have downloaded the APP, you can directly turn off the built -in pop -up web page, open the APP to successfully access, and you can set more in the app

▼ Let’s set an Internet account and password first. Set WiFi, of course, it is best to turn off dual -frequency combination. The test dual -frequency combination of the majority of netizens may affect the actual use.

I use Huawei Honor 7 full Netcom mobile phones. Please note that in addition to the network situation and router, the WiFi module used by the WiFi connection is also one of the factors for reference. Please test other terminals.

Let’s test the connection of 2.4G first. It can be seen that the signal strength is strong, the speed of 72M network speed test download speed 6m upload 550kb/s

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ 5G signal strength strong connection speed, 433m. Download speed 11.2MB, average download speed 10.9m, upload 553kb/s

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ Because the family is relatively small, but there are many walls and thick walls, the room -level routes from TP enterprise -level routes have been used from my room to the elderly.

The 5G signal is strong, the connection speed is 390m. Download 10.7m/s, upload 538kb/s

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ 2.4G signal strong, connecting speed of 65m, download speed 4.5m/s, uploading speed 548kb/s.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ Because it is good to test, the distance test is also necessary

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

I live in the staircase on the 8th floor. I did not expect that there was a signal to the 2L staircase signal this time. Before the TPWR 2041N signal on the 6th floor staircase was disconnected.

2.4G signal, 5m connection speed. Download speed 803kb/s, upload 465kb/s

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ 5G signal is strong, the connection speed is 13m, download 1.7MB/s, upload 644KB/s

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ The signal intensity of the signal under the window of my room downstairs is better than me in the stairs.

2.4G signal strong, connect speed 58m, download 1.6m/s, upload 528kb/s

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ 5G signal is strong, with a speed of 87M, but unfortunately forgot to test, but it is not bad to see the speed.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ Many people may not have a concept. This is my old house. For more than 20 years, there is a light on the top floor. My room is 3M and 1L 5M high. My room is located in the support pillar. It is also the thickest part. The middle of my room is full of cement exterior walls

▼ This is about 15m from my house, and there is a building in the middle. I stand under the third floor. The signal has begun to break a few steps back. There is a signal a few steps back. There is no signal in a few steps forward. Because from the perspective of the transmission method of the signal, the wall of the middle building in the middle is too thick, and the signal is infinitely weakened. If there is no floor in the middle, the signal should be far away.

▼ At the beginning, the height of the height of my DIY was placed in Feixin K3, but it may also be a bit of the display screen and signal, and the concrete load beam. It is a bit blocking signal source here. It seems that it is better to put it in the future

▼ 2 Feixun K3, the second one is tested as a relay routing. No need to consider changing places now, how to obstruct, then use 2 K3 relay to solve

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ First of all, we put Feixun K3 routing in the living room, power -on, and connect to WIFI. Similarly, we use the APP operation, which is convenient and simple. Of course, some computers may also be set up with a computer first, but Feixun’s app can simply solve this problem.

▼ Enter the route settings, click the advanced settings on the upper right, do you see the wireless expansion, that is the setting of the relay.

▼ We turn on the wireless extension and we can see the expansion network. Let’s choose the 2.4G signal of the Faixin K3 main router as the connection extension.

▼ Enter the wifi password of the main router, just wait for restart. Feixun should have a built -in set of programs, setting other DHCP and other settings.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ It can be seen that we have successfully connected to the relay router to successfully expand the main router 2.4G signal 2.4GWIFI

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ 2.4G signal is strong, the connection speed is 52m, the download speed is 4.2m, and the uploading 550K/s is not completely damaged. After all, it is separated by a wall of the wall, and it can only enhance the connection range of your terminal.

▼ We changed the 5GWIFI signal to the main router of connecting the relay router to expand the main router 2.4GWIFI

Connection speed 86m. Download speed of 7.6m/s, uploading speed 555kb/s. It seems that from the 2.4G cross -wall relay, the relay route sends a 5GWIFI signal to enhance the network speed. This is the unique dual frequency of K3.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ Now we change to the 5GWIFI signal issued by the main router to the main router. I agree that we set up the successful connection after the restart.

▼ Main router 5GWIFI signal extension, relay router 5G signal issued

Strong signal, 433m/s, download speed 10.9m/s, upload speed 591kb/s

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

▼ The main router 5G signal extension, the relay router issues a 2.4GWIFI signal

Strong signal intensity, connection speed of 65m, download speed 5.8m/s, upload 548kb/s

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

It can be seen that the WiFi mode after the two -frequency combination of Feixun K3 is still quite powerful. Whether it is 2.4G, it has a weaker network speed. 5G is weak and the transmission distance is long. The network speed is powerful. Both have their weaknesses, and both parties need complementation. The existence of the dual -frequency integration solution of Fei Xun K3 must have its reasons. Whether it is the main router issued a 2.4G/5G WIFI signal, or the relay router selects the wifi signal of 2.4G/5G, and then transformed into a 2.4G/5G signal to cope with the layout of different areas and the room. Good solution. In addition to the power of the dual -frequency router is a better choice signal for the main router, it is more to deal with the recreation signal of the relay router and then transfer the 2.4G/5G signal source.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

Summarize:

Today we do not discuss the risk of Feixun K3’s Internet+financial free hardware model. We simply discuss the hardware configuration of Feixun K3.

Feixun AC 3150 dual -frequency wireless router K3

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

advantage:

Dual -frequency router, 2.4G+5G complementary, whether it is used in the main router or relay router, the applicability is very strong.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

The design is very fashionable, and the overall appearance has a sense of technology.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

The design of the display is very good. The operation is easy. Touch screen keys are also very thoughtful.

The hardware is quite powerful, high -end CPU, dual -frequency 1.4G 128M flash memory, 512M memory. 8 antenna gains, etc. The hardware of the workmanship is high -end router level. Gigabit Wan port, 3 Gigabit LAN ports and USB3.0 are very good, providing offline download.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

By disassembling, you know that the workmanship is the level of large factories, and it is indeed a powerful design.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

The built -in relay solution and the APP connection control mode are becoming more and more mature.

The Internet+financial free model corresponds to its powerful cost -effective. (In fact, the first user of the first need to be worth the fare will be worth the fare, and it will make a pure profit in the back)

shortcoming:

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

The design is very fashionable, but the color matching is too monotonous. Only silver and black.

The display is located above, which may be difficult to operate for users who like to put routers in high levels

Some people responded that some K3 had high -speed downloads and current sounds, and they did meet in the second Feixun K3. But it does not affect the use

Such a powerful configuration is indeed a bit stunned about such firmware. With reference to the AC88U of similar configurations, its firmware function should be more powerful.

斐讯K3智慧家庭路由器——详尽拆解模式与AP中继威力通通都有

Overall, the advantages are very good, and the disadvantage is that some details of life experience. After all, there may be more colors to choose from in the back. The display is purely a preference. High -speed download current sounds are temporarily unknown. If the firmware, there can be more official firmware or other third -party firmware to choose from. Its powerful configuration is enough to deal with many conditions, especially if the dual -frequency conversion as a relay router can solve more problems. Even if you do n’t talk about the Internet+financial model, it can still correspond to the configuration of high -end routers at a level of 1,000 yuan. After the firmware is improved, it is more perfect.