[Pacific Home Furnishing Network Daren Life Museum] The relationship between us and others, especially at work, often starts to see each other, and finally business cards. A business card is a representative of the other party. It is a friend. Make a leather clip personally, and it is respectful. Slightly serious, but it is not monotonous.
工具准备:两张不同颜色的皮料、裁皮刀、锥子、直尺、法斩、挖槽器、削边器、牛骨棒、砂纸条、黑色边油、水性胶、棉签、尼龙锤, Two leather needles, black hand seam wax lines, hardware accessories.
Step 1: After cutting the black skin into two rectangles of 10.5cm*6.5cm, four corners are treated as a rounded corner
Step 2: Use the slot to adjust to 4mm and dig the trough on the back of the two outer skin to facilitate the thin edges.
Step 3: Use a cutting knife to be thinned on the edge with a slot line, until there is a significant difference in the middle.
Step 3 to complete the effect:
Step 4: Paste the two leather and a brown leather with water -based glue, and then press the drum with the edge of the bone bone stick on the edge of the previously cut, until there is a significant high and low difference.
Step 4 to complete the effect:
Step 5: Use a cutting knife or a artist to cut the criminal lit in the shape of the outer skin.
Step 5 to complete the effect:
Step 6: A piece of leather of about 2.5*7cm is cut into a rounded corner. After the same processing method, it is broken and the brown leather pastes and drums.
Step 6 to complete the effect:
Step 7: Plus the leather edge with sand strips, and apply the black edge oil with a cotton swab.
Step 8: Use how to cut the edge of the previous drums vertically.
Step 9: Use the black wax line to sew the flip bar (please refer to the geometric card bag tutorial in the previous period)
Step 10: Switch on the top of the front and back of the front and back to the flip -bar.
Step 11: Use a small circle to hit a small round hole on the flip bar and the front leather, install the monk head hardware.
Step 12: Combining the front and back skin, suture the remaining left and right three sides together.
Step 13: After polishing the surroundings with a grinding strip, apply the edge oil with a cotton swab to evenly apply it to the leather edge. After drying, polish it again, and then go to the oil to the flat and smooth.
Finished product map:
The content of this article is exclusively provided by the “China Fashion Home Furnishing Website Leader” Pacific Home Network.