Several installation methods of linear guide-Dongzhi Liheng

With the widespread application of high -precision linear guide rails in industrial automation. Must master certain installation skills. Master the correct installation method of the linear guide to improve the life and accuracy of the guide rail.

In order to ensure the parallel degree between the dynamic side sliding rail and the benchmark side slide rail, there is no horizontal positioning assembly.

1. Use the installation benchmark surface installation party

First, fix the bottom reference surface of the straight line guide rail with the base surface of the straight line on the bottom of the bed, and then press the benchmark of the sliding rail on the side of the bed with the side of the slider to determine the position of the sliding rail. Use a wrench to fix the guide rail and guide rail on the table according to a certain torque.

2. Installation of the straight line guide rail from the dynamic side

1. Straight block rules

Put the linear block between the two straight -line guide rails, use the quasi -line -based block rules of thousands of ruler to make it parallel on the side -based quasi -surface of the reference side slide rail, and then the motion -side slide rails are allowed according to the linear block. Start at the end of the rails, lock the tightly tightly matte with a certain torque.

2. Mobile platform method

The two sliders on the benchmark side are fixed on the measurement platform, but only one slider is installed from the dynamic side. The guide rail and slider are not fixed on the base and platform. Use the thousand -footer measuring the side base of the dynamic side slider attached to the top surface of the dynamic side slider. Check the one end of the dynamic straight line guide, lock the tightly tightly matte screw according to a certain torque.

3. Improve the basis of the basal side sliding rail method

Fix the two sliders on the benchmark side -to -line guide rail and a slider from the dynamic side on the platform, and then fix the guide rail from the dynamic side, the bed body and another guide on the platform, and the platform. According to the reference side sliding rail mobile platform. Starting from one end of the sliding rail, at the same time, confirm the rolling resistance of the moving straight line guide rail, and lock the tight -loaded screw in order according to a certain torque.

4. Dedicated tool method

Use professional tools to determine the sliding rail at the position of the motion side, lock the tightly tightly tightly tightly tightly tightly tightly tightly tightly matte screw.

Product Recommendation: under mount slides