Production process
The first step is to choose fabrics. We generally use silk satin or elastic spinning and then scrape the paste, and then scrape it according to the veil of the fabric.
Step 2: Remove the sides of the fabric, cut 45 ° oblique wire, 1.8cm wide
Step 3: Fold the fabric strip, and then fold left and right
Step 4: Take the cloth strip to the hot table to do it. Remember to turn on the cold wind.
Step 5: Preparation
Step 6: Fix the bead needles at both ends of the iron wire (can be wrapped)
将铁丝放置在布条中间,上面在放一条同布条长度的**（要将**塞到布条的缝里面）,再用熨斗在布条上端（不要接触到布条）嘘一下（ No need to open the cold wind), so that the glue melts
Step 7: Put a piece of ** on the cloth strip, so as not need to be stuffed in the gap of the cloth strip. Black with an iron again
Step 8: Open the cold wind, fold the cloth strip, so that it will stick. The teeth are completed.
Step 9: Fold the prepared teeth according to the previously designed pattern, and use pliers to be used for the discount.
Step 10: Swallow the teeth with four lines, sew it up and down, and be as compact as possible. And it is necessary to deal with the upward line traces, don’t expose the wire traces, just
Step 11: The sewing teeth
Step 12: Prepare the cotton that needs to be filled with buckles, and fabrics (if the fabric is thin, it needs to be hot).
The cotton’s force is made into a small ball. The shape of this group is determined according to the previously designed pattern. If it is oval, it can be elliptical.
Step 14: Pruning the fabrics around the teeth